HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 32
User Interface Board, Optical Device/Diskette Drive Assembly or Bezel Blank in
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Removal and Replacement Procedures User Interface Board To remove the user interface board: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. 3. Remove the shipping/ejector key. See "Shipping/Ejector Key" in this chapter. 4. Remove the optical device/diskette drive assembly or bezel blank. See "Optical Device/Diskette Drive Assembly" or "Bezel Blank" in this chapter. 5. Remove the optical device/diskette drive assembly backplane. See "Optical Device/Diskette Drive Assembly Backplane" in this chapter. 6. Slide the user interface board toward the rear of the server and lift to remove the board. IMPORTANT: Remove the user interface board carefully to avoid damaging the light pipes. Figure 2-15: Removing the user interface board Reverse steps 1 through 6 to replace the user interface board. HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide 2-21 HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM