HP E34m User Guide - Page 19
Attaching the monitor head to a mounting device, Routing the cables
View all HP E34m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5. Slide the stand out of the recess (3). Attaching the monitor head to a mounting device You might need additional tools such as a screwdriver (purchased separately) when you attach a mounting device. To avoid damage to your monitor, follow these instructions. 1. Remove the four screws from the VESA holes located on the rear of the monitor head. 2. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws through the holes on the mounting device and into the VESA screw holes on the back of the monitor head. IMPORTANT: If these instructions do not apply to your device, then follow the mounting device manufacturer's instructions when mounting the monitor to a wall or swing arm. Routing the cables The monitor stand includes a cable management feature that you can use to organize your monitor cables. 1. Route any cables that you want to organize through the stand. Attaching the monitor head to a mounting device 13