HP EliteBook Folio 1020 EliteBook Folio 1020 G1 Notebook PC EliteBook Folio 10 - Page 76
Speaker assembly, Remove the three Phillips PM2.0×2.4 screws
View all HP EliteBook Folio 1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Speaker assembly Description Speaker assembly for use in standard models (includes cable) Speaker assembly for use in Bang & Olufsen Limited Edition models (includes cable) Spare part number 800583-001 837352-001 Before removing the speaker assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Remove the battery (see Battery on page 60). 6. Remove the system board (see System board on page 64). Remove the speaker assembly: 1. Remove the three Phillips PM2.0×2.4 screws (1) that secure the speaker to the computer. 2. Remove the speaker (2) from the computer. Reverse this procedure to install the speaker. 68 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts