HP Integrity Superdome 2 8/16 HP Superdome 2 Partitioning Administrator Guide - Page 45
Removing blades and I/O bays from an nPartition, IOX Resources Option
View all HP Integrity Superdome 2 8/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 10 IOX Resources Option 5. Select the I/O bay. 6. Click Apply to commit your configuration changes. To cancel an operation, navigate away from the Modify nPartition screen. The blades and I/O bay are assigned to the nPartition. Removing blades and I/O bays from an nPartition This section describes the procedure to unassign or remove blades and I/O bays from an nPartition. Removing blades and I/O bays from an nPartition using the OA CLI Use the following command to remove a blade in enclosure 1 slot 3 from the existing nPartition 2: parmodify -p 2 -d blade:1/3 For example, the following command deletes I/O bay 1 in enclosure 6 to the existing nPartition 2: parmodify -p 2 -d io:6/1 NOTE: If the nPartition is active, the blades and I/O bays are unassigned when the nPartition reboots. Removing blades and I/O bays from an nPartition 45