HP Integrity Superdome SX1000 HP Insight Management WBEM Providers on Integrit - Page 61

Table 6-2 Class: HP_NumericSensor Property name SensorType CurrentState PossibleStates CIM_NumericSensor CurrentReading BaseUnits RateUnits UnitModifier SupportedThresholds SettableThresholds UpperThresholdNonCritical UpperThresholdCritical UpperThresholdFatal HP_NumericSensor NumericSensorType Property implementation 2 (Temperature) • Normal-if OperationalStatus[0] is 2 (OK) • Critical-if OperationalStatus[0] is 6 (Error) Array can contain any of the following values: • PossibleStates[9] = Normal • PossibleStates[3] = Critical Current reading of temperature sensor 2 (Degrees C) 0 (None) 0 • SupportedThresholds[0] = 1 (UpperThresholdNotCritical) if the system will set fans to full speed if the threshold is crossed • SupportedThresholds[0] = 3 (UpperThresholdCritical) set if the system will gracefully attempt to shutdown the system if the threshold is crossed • SupportedThresholds[0] = 5 (UpperThresholdFatal) if the system will immediately power down the system if the threshold is crossed Contains the threshold temperature that CurrentReading must exceed to be in a non-critical state. This is only set if the system will set fans to full speed if the threshold is crossed. Contains the threshold temperature that CurrentReading must exceed to be in a critical state. This is only set if the system will gracefully attempt to shutdown the system if the threshold is crossed. Contains the threshold temperature that CurrentReading must exceed to be fatal. This is only set if the system will immediately power down the system if the threshold is crossed. Enumeration describing the type of temperature sensor. Refer to MOF. 5BSystem Temperature Sensor 61