HP Integrity Superdome SX1000 HP Insight Management WBEM Providers on Integrit - Page 68

Table 7-4 Class: HP_MemoryModule Property name RemovalConditions CIM_Chip CIM_PhysicalMemory DataWidth InterleavePosition Capacity TotalWidth Speed MemoryType PositionInRow FormFactor BankLabel HP_MemoryModule Spd Property implementation 3 (Removable when off) Data width of memory module in bits Position of memory module in an interleave Total capacity of memory module in bytes Total width of memory module in bits Speed of memory module in nanoseconds Enumerator indicating the type of memory module. See the MOF file for details. Position of memory module in a row Enumerator indicating the form factor of the memory module. See the MOF file for details. String identifying the physically labeled bank where the memory is located. This property is conditional. It is populated if the data is available. An array that contains raw Serial Presence Detect information for the memory module. Each array element contains a byte of the Spd. This property is conditional; it is populated if the data is available. Table 7-5 Memory Module Status Condition OperationalStatus[0] StatusDescriptions[0] Memory module status is unknown • 0 (Unknown) • Memory module status: Unknown Memory module is operating properly • 2 (OK) • Memory module status: OK Memory module is present but is not • 2 (OK) currently used by the operating system • Memory module status: OK Memory module has correctable errors exceeding the condition for pre-failure warranty • 3 (Degraded) • Memory module status: Degraded OperationalStatus[1] StatusDescriptions[1] • • • • • 15 (Dormant) • Memory module status: Memory present but not in use • 5 (Predictive Failure) • Memory module status: Correctable error threshold for pre-failure warranty has been exceeded 6BSystem memory 68