HP Integrity rx8620 Windows Integrity Management Agents Reference - Page 19
DIMM number not found in DMT Table Probable Cause: Probable internal FW error
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Event ID Event Severity Event Description 5161 Warning Memory ECC normal write/read test failed Probable Cause: The DIMM that maps to cache line 0 is in a chipspare condition Recommended Action: Contact HP support SNMP Trap: hpevtMemCacheLine0WrRdFailed - 5161 in HPIFPTRAP.MIB. 5171 Warning DIMM loading order error: DIMM deallocated Probable Cause: A required DIMM is not loaded in order to allow for proper operation of the DIMM specified in the physical location. Recommended Action: Refer to the user's manual for Memory loading instructions. SNMP Trap: hpevtMemDimmLoadOrderErr - 5171 in HPIFPTRAP.MIB. 5172 Warning DIMM SPD checksum failed Probable Cause: The DIMMs SPD EEPROM got corrupted. Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemDimmSpdChecksum - 5172 in HPIFPTRAP.MIB. 5173 Warning DIMM SPD fatal error Probable Cause: Detection of SPD error type - various types Recommended Action: Reseat or replace the DIMM. If problem persists, contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemDimmSpdFatal - 5173 in HPIFPTRAP.MIB. 5174 Warning Unsupported memory DIMM type Probable Cause: A DIMM with an invalid DIMM type was found Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemDimmTypeIncompatible - 5174 in HPIFPTRAP.MIB. 5175 Warning The DIMM type of this DIMM doesn't match with others in the DIMM group Probable Cause: The DIMMs in the rank do not have the same DIMM type Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemDimmTypeMismatch - 5175 in HPIFPTRAP.MIB. 5176 Warning The DIMM type table is full. New DIMM type cannot be added. Probable Cause: Too many different types of DIMMs in system Recommended Action: Reduce the number of different types of DIMMs in the system. SNMP Trap: hpevtMemDimmTypeTableFull - 5176 in HPIFPTRAP.MIB. 5179 Warning DIMM number not found in DMT Table Probable Cause: Probable internal FW error Recommended Action: Reload System Firmware Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemDmtEntryNotFound - 5179 in HPIFPTRAP.MIB. 5180 Warning Memory ECC multiple-bit data error detection failed Probable Cause: The CEC failed MBE detection. Recommended Action: Contact HP support personnel to troubleshoot the problem SNMP Trap: hpevtMemEccMbeDataTstFailed - 5180 in HPIFPTRAP.MIB. 5181 Warning Memory ECC multiple-bit ECC error signalling failed Probable Cause: The CEC failed MBE detection. Recommended Action: Contact HP support personnel to troubleshoot the problem SNMP Trap: hpevtMemEccMbeSignalTstFailed - 5181 in HPIFPTRAP.MIB. 5182 Warning Memory ECC single-bit data error detection failed Probable Cause: The CEC failed SBE detection. Recommended Action: Contact HP support personnel to troubleshoot the problem SNMP Trap: hpevtMemEccSbeDataTstFailed - 5182 in HPIFPTRAP.MIB. 5183 Warning Memory ECC single-bit ECC error detection failed Probable Cause: The CEC failed SBE detection. Recommended Action: Contact HP support personnel to troubleshoot the problem SNMP Trap: hpevtMemEccSbeEccTstFailed - 5183 in HPIFPTRAP.MIB. 5185 Warning Insufficient memory for operation Probable Cause: FW detected memory errors below 1MB. Recommended Action: No action is needed if FW recovers. If system will not boot, contact HP support to troubleshoot the problem. SNMP Trap: hpevtMemEnoughMemFailed - 5185 in HPIFPTRAP.MIB. 5186 Warning Memory address not found in MBAT Probable Cause: The address logged in the CEC doesn't map to a memory rank, possibly due to a SFW error or NVM corruption Recommended Action: Contact HP support to troubleshoot the problem. SNMP Trap: hpevtMemErrAddrNotInMbat - 5186 in HPIFPTRAP.MIB. Platform Agent Events 19