HP Integrity rx8620 Windows Integrity Management Agents Reference - Page 27

Event ID Event Severity Event Description 5525 Warning Copying memory test code failed. Probable Cause: Memory test code located in main memory has been corrupted Recommended Action: Contact HP support personnel to troubleshoot the problem SNMP Trap: hpevtMemTestCodeInPage0Corrupt - 5525 in HPIFPTRAP.MIB. 5527 Error A remote cell is in an unknown state of PD rendezvous Probable Cause: Reset the PD. SNMP Trap: hpevtRemoteCellStateUnknown - 5527 in HPIFPTRAP.MIB. 5528 Error Multiple Core Cells have been discovered in the same PD Probable Cause: Verify that the complex profile is correct and reset the partition. SNMP Trap: hpevtPdMltplCoreCells - 5528 in HPIFPTRAP.MIB. 5529 Error The utilities component encountered an error when sending a command to the MP Probable Cause: Verify the utilities system is connected correctly and reset. SNMP Trap: hpevtUtilSendCommandError - 5529 in HPIFPTRAP.MIB. 5530 Warning Error received after issuing the Retrieve Cell Slot State command Probable Cause: Make sure the GSP is connected and reset. SNMP Trap: hpevtUtilCellSlotError - 5530 in HPIFPTRAP.MIB. 5546 Error This indicates that all the cpus in the cell did not rendezvous during the MCA. Probable Cause: When this happens the cell will step through some of the error logging code on its own and then reset itself. SNMP Trap: hpevtMcCellRendezFailed - 5546 in HPIFPTRAP.MIB. 5547 Error This indicates that it does not have any access to the PD. Probable Cause: Forward Progress indicator; the cell will independently step through the error logging steps before it resets itself. SNMP Trap: hpevtMcNoAccessToPd - 5547 in HPIFPTRAP.MIB. 5548 Error This indicates the loss of lockstep during the MCA path. Probable Cause: The cell will take up a few more error logging steps independently before resetting itself. SNMP Trap: hpevtMcLossOfLockstep - 5548 in HPIFPTRAP.MIB. 5550 Error The PD level cell rendezvous failed. Probable Cause: This means that the cells will independently step through some of the error logging code and then reset themselves. SNMP Trap: hpevtMcPdCellRendezFailed - 5550 in HPIFPTRAP.MIB. 5556 Error It stands for diagnosis of catastrophic errors in the PIN block of concorde. Probable Cause: This means that the cell will be reset. SNMP Trap: hpevtMcProcErrHalt - 5556 in HPIFPTRAP.MIB. 5557 Error The cell monarch cpu has failed. Probable Cause: The monarch cpu will be deconfigured. SNMP Trap: hpevtMcCellMonarchTimeout - 5557 in HPIFPTRAP.MIB. 5558 Error This indicates that the cell missed the rendezvous at the partition level. Probable Cause: The cell will independently step through some of the error logging steps and then finally reset itself. SNMP Trap: hpevtMcPdCellMissedRendez - 5558 in HPIFPTRAP.MIB. 5559 Error This means that the PD monarch timedout. Probable Cause: The cell will be reset ; also the partition will be reset. SNMP Trap: hpevtMcPdMonarchTimeout - 5559 in HPIFPTRAP.MIB. 5560 Error SetViewRoot on a remote cell failed. Probable Cause: Inter Processor interrupts failed. Be sure that the partition rendezvous was successfully completed. Reset. SNMP Trap: hpevtRemoteSetViewRootError - 5560 in HPIFPTRAP.MIB. 5566 Error Failed to update CSR contents Probable Cause: Coherency controller on cell sending event is suspect. Recommended Action: Provide event data to HP support center for assistance. SNMP Trap: hpevtCsrTestFailure - 5566 in HPIFPTRAP.MIB. 5567 Error This indicates the failure in collecting the Complex profile info. Probable Cause: The partition level memory interleaving cannot continue without the appropriate information. SNMP Trap: hpevtPdMemGetIcmInfoFailed - 5567 in HPIFPTRAP.MIB. 5568 Error This chassis code indicates the failure in collecting the cell info. Probable Cause: The partition level memory will fail. SNMP Trap: hpevtPdMemGetCellInfoFailed - 5568 in HPIFPTRAP.MIB. Platform Agent Events 27