HP J3111A HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - Page 122
Table 7.5, General HP JetDirect Messages 2 of 15, Start Delimiter SD and the End Delimiter ED.
UPC - 002421211157
View all HP J3111A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Table 7.5 General HP JetDirect Messages (2 of 15) Message Description BAD BOOTP TAG SIZE The tagsize in a vendor specific field in the BOOTP reply is either 0, or greater than the remaining number of unprocessed bytes in the vendor specified area. BAD LENGTH RCVD: Total number of frames missed because they were too long for the HP JetDirect print server to receive. BAD PACKETS RCVD: Total number of frames (packets) received by the HP JetDirect print server with errors. BOOTP/DHCP IN PROGRESS The HP JetDirect print server is currently in the process of obtaining its basic IP configuration information through BOOTP/DHCP, and has not detected any errors. BURST ERRORS RCVD: Number of times the HP JetDirect Token Ring print server could detect no transitions for 5 half-bit times between the Start Delimiter (SD) and the End Delimiter (ED). CF ERR - ACCESS LIST EXCEEDED The TFTP configuration file specified too many access list entries using the "allow:" keyword. CF ERR - FILE INCOMPLETE The TFTP configuration file contained an incomplete last line that did not end in a newline character. CF ERR - INVALID PARAM A line in the TFTP configuration file contained an invalid value for one of the parameters on that line. CF ERR - LINE TOO LONG A line being processed in the TFTP configuration file was longer than the HP JetDirect print server could accept. CF ERR - MISSING PARAM A line in the TFTP configuration file was missing a required parameter. CF ERR - TRAP LIST The TFTP configuration file specified too many trap EXCEEDED destination list entries using the "trap-destination:" keyword. CF ERR - UNKNOWN A TFTP configuration file line contained an unknown KEYWORD keyword. CONFIGURATION ERROR The configuration information for the NetWare functions is not stored correctly on the HP JetDirect print server. Rerun the installation software to reconfigure. If this error persists, there may be a problem with the HP JetDirect print server. CRC ERROR Check the network topology and verify all cable segments. Check for damaged cables. 116 HP JetDirect Configuration Page Messages EN