HP J4868A User Manual - Page 42
Straight-Through Twisted-Pair Cable for 10 Mbps or 100 Mbps Network Connections, Cable Diagram
View all HP J4868A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Switch Ports and Network Cables Switch Ports and Network Cables Twisted-Pair Cable/Connector Pin-Outs Straight-Through Twisted-Pair Cable for 10 Mbps or 100 Mbps Network Connections Because of the "HP Auto-MDIX" operation of the 10/100 ports on the switch, for all network connections, to PCs, servers or other end nodes, or to hubs or other switches, you can use "straight-through" cables. Cable Diagram Connector "A" Connector "B" Straight-Through Cable Note . white/orange orange/white white/green green/white Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2 on connector "B". Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6 on connector "B". Pins 4, 5, 7, and 8 are not used in this application, although they may be wired in the cable. Pin Assignments Switch End (MDI-X) Signal Pins receive + 1 receive - 2 transmit + 3 transmit - 6 Computer, Transceiver, or Other End Pins Signal 1 transmit + 2 transmit - 3 receive + 6 receive - B-4