HP Jetdirect 280m HP Jetdirect 200m Print Server - (English) Administrator Gui - Page 223
IPX/SPX Protocol Information, Table 9.7
View all HP Jetdirect 280m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
IPX/SPX Protocol Information Information in this section of the Jetdirect configuration page is described in Table 9.7. For error messages, see Table 9.12. Table 9.7 IPX/SPX Configuration Information (1 of 2) Message STATUS: PRIMARY FRAME TYPE: Description Indicates the current IPX/SPX protocol status. READY: Indicates the HP Jetdirect print server is awaiting data over IPX/SPX. DISABLED: Indicates that IPX/SPX was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is displayed if the print server is not ready. For more information, see Table 9.12. Specifies the frame type selection on the Jetdirect print server. AUTO SELECT: The print server automatically senses and limits the frame type to the first one detected. EN_8023: Limits the frame type to IPX over IEEE 802.3 frames. All others will be counted and discarded. EN_II: Limits the frame type to IPX over Ethernet frames. All others will be counted and discarded. EN_8022: Limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All others will be counted and discarded. EN_SNAP: Limits the frame type to IPX over SNAP with IEEE 802.3 frames. All others will be counted and discarded. TR_8022: Limits the frame type to IPX over IEEE 802.2 with IEEE 802.5 frames. All others will be counted and discarded. TR_SNAP: Limits the frame type to IPX over SNAP with IEEE 803.5 frames. All others will be counted and discarded. ENWW HP Jetdirect Configuration Page 223