HP Jetdirect 610n HP Jetdirect Print Servers - Administrator Guide - Page 119
Table 4.3, 11B Configuration Parameters 7 of 7, Using the Embedded Web Server 119
View all HP Jetdirect 610n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Table 4.3 Item 802.11B Configuration Parameters (7 of 7) Description Dynamic For dynamic encryption, you may select one of the following options: G Basic Encryption: Dynamic WEP encryption is supported. G Robust Encryption: Dynamic Wi-Fi Protected Access (WPA) and WEP encryption protocols are supported. When configured for EAP/PSK authentication, the print server uses Robust Encryption (WPA encryption protocols). When configured for EAP/802.1x authentication (LEAP only), the print server should be configured with Basic Encryption. When configured for EAP/802.1x authentication (PEAP, TLS, TTLS only), the print server may be configured with either Basic Encryption or Robust Encryption depending on your network. Dynamic encryption protocols are under the control of the authentication server and also must be supported by the Access Point. TCP/IP settings To minimize reconnections to the print server for initial network configuration, the 802.11b page allows you to configure the following basic TCP/IP settings at the same time that you configure your wireless connection settings: G IP Configuration Method G IP address G Subnet Mask G Default Gateway For a description of these parameters, see TCP/IP below. ENWW Using the Embedded Web Server 119