HP Jetdirect 610n HP Jetdirect Print Servers - Administrator Guide - Page 236
Table 9.12, Error Messages 5 of 11, HP Jetdirect Configuration
View all HP Jetdirect 610n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Table 9.12 Error Messages (5 of 11) Error Code and Message Description 1D UNABLE TO CONNECT TO SERVER Remote Printer mode error: The HP Jetdirect print server was unable to establish an SPX connection with the NetWare print server. Make sure that the NetWare print server is running and that all cables and routers are functioning correctly. 1E FAIL RESERVING PRINTER NUM The SPX connection to the print server was lost when the HP Jetdirect print server attempted to reserve the printer number. This indicates a possible network problem, or a problem with the print server. Make sure all cables and routers are functioning correctly. Try restarting the print server. 1F ERR NEGOTIATING BUFFER SIZE A failure was detected when selecting the buffer size to be used when reading print data from the file server. This may indicate a network problem. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers was successfully connected. 20 UNABLE TO LOGIN A failure was detected when the HP Jetdirect print server tried to log onto the file server. This could be caused by the print server object not existing on the file server, or by a security check that prevents the print server from logging in. Make sure the file server name and print server object name are correct. Use PCONSOLE to erase the password for the print server object. Create a new print server object. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers made the connection. 21 UNABLE TO SET PASSWORD A failure was detected when the HP Jetdirect print server tried to set the password for the print server object. (Whenever the HP Jetdirect print server is able to log in without a password, it sets the password automatically.) This indicates a networking or security problem. Create a new print server object. When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers were successfully connected. 22 UNABLE TO CONNECT TO SERVER Queue Server mode error: The HP Jetdirect print server could not establish an NCP connection to the file server. Make sure that the correct file servers are connected. When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers were successfully connected. ENWW HP Jetdirect Configuration Page 236