HP Jetdirect 610n HP Jetdirect Print Servers - Administrator Guide - Page 268
Using Your Web Browser Windows and Mac OS., Microsoft Windows., Example
View all HP Jetdirect 610n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Using Your Web Browser (Windows and Mac OS). To use your Web browser to configure the Jetdirect wireless print server with a wireless connection to your network, your system must be set up for operation on a TCP/IP network. Web browser wireless connection instructions are provided for the following systems: Microsoft Windows, and Apple Macintosh (see page 270). G Microsoft Windows. To use your Web browser on a Windows system, follow these steps: 1. Verify that your computer's wireless network settings match the factory-default settings on the HP Jetdirect print server. 2. Open a DOS Command Prompt window. 3. At the command prompt, enter ipconfig. The ipconfig command will display the computer's IP address. Record this address. 4. Use a "route add" command to establish an IP path (or route) from your wireless computer to the print server. (This means that there must be a match between the network identification of your system to that of the HP Jetdirect print server. If the print server is configured with its default IP address, for example 169.254/16 or 192.0.0.192, a route may not exist.) Note A typical route add command is entered as follows: route add where is the IP address on the HP Jetdirect print server, and is the IP address set on the computer's network card. Example: route add 192.0.0.192 192.170.1.2 ENWW HP Jetdirect 802.11b Wireless Print Servers 268