HP KA460UT HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - Page 82
RTC battery, Remove the memory module see
UPC - 883585836567
View all HP KA460UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
RTC battery NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. Description RTC battery Spare part number 449137-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the memory module (see Memory module on page 55). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Remove the RTC battery (2) from the clip built into the top cover. Reverse this procedure to install the RTC battery. 74 Chapter 4 Removal and replacement procedures