HP KS159UT HP 550 Notebook PC - Maintenance and Service Guide - Page 54
Optical drive, Before removing the optical drive, follow these steps
UPC - 884420899839
View all HP KS159UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description Supports the following PATA optical drives: DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVD/CD-RW Combo Drive DVD-ROM Drive Optical drive connector board (PATA) Supports the following SATA optical drives: DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVD/CD-RW Combo Drive DVD-ROM Drive Optical drive connector board (SATA) Spare part number 500768-001 500767-001 500766-001 456805-001 507116-001 507117-001 507115-001 495386-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 46 Chapter 4 Removal and replacement procedures