HP KS159UT HP 550 Notebook PC - Maintenance and Service Guide - Page 74
System board, that secure the Bluetooth module to the base
UPC - 884420899839
View all HP KS159UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
f. Display lid switch module (see Display lid switch module on page 54) g. Display assembly (see Display assembly on page 55) h. Top cover (see Top cover on page 60) Remove the Bluetooth module: 1. Disconnect the Bluetooth module cable (1) from the system board. 2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the base enclosure. 3. Remove the Bluetooth module (3) from the base enclosure. Reverse this procedure to install the Bluetooth module. System board NOTE: All system board spare part kits include the ExpressCard assembly. NOTE: All system board spare part kits include replacement thermal material. Replacement thermal material is also available in the heat sink spare part kit, spare part number 456605-001. Description Spare part number For use only with computer models equipped with Intel GME965 graphics chipset, Intel UMA graphics subsystem, and PATA optical drive 495410-001 For use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA graphics 495395-001 subsystem, and PATA optical drive For use only with computer models equipped with Intel GME965 graphics chipset, Intel UMA graphics subsystem, and SATA optical drive 495404-001 For use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA graphics 495397-001 subsystem, and SATA optical drive 66 Chapter 4 Removal and replacement procedures