HP LTE 5000 LTE 5000 Family of Personal Computers Maintenance and Service Guid - Page 151
Status Panel, the cable. It is very important that this cable be routed
View all HP LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
3. Lift the microphone and its boot out of the computer (Figure 5-27). NOTE: The microphone extension cable cannot be properly accessed for service until the processor board is removed. See Section 5.11 for details on the extension cable. To install a microphone, reverse the above procedure. Chapter 5.7 Status Panel The CPU cover must be removed to gain access to the status panel. To remove the status panel assembly, complete the following steps: 1. Prepare the computer for disassembly as described in Section 5.3. 2. Remove the CPU cover as described in Section 5.5.1. IMPORTANT: Note the routing of the status panel cable before disturbing the cable. It is very important that this cable be routed properly at reassembly. 3. With the display open and tilted all the way back, disconnect the status panel cable [1] (Figure 5-28).