HP LTE 5000 LTE 5000 Family of Personal Computers Maintenance and Service Guid - Page 212
Speaker Assemblies, Remove the bottom cover assembly as described
View all HP LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Reverse the above procedure to install the IrDA board. Chapter 6.15 Speaker Assemblies The bottom cover assembly must be removed before removing the speaker assembly. The speaker assembly is installed as a unit with its cable permanently attached. To remove the speaker assembly, complete the following steps: 1. Prepare the expansion base for disassembly as described in Section 6.3. 2. Remove the bottom cover assembly as described in Section 6.5. 3. Note the cable routing [2] and disconnect the speaker cable [1] from the main board (Figure 6-28).
Reverse the above procedure to install the IrDA board.
Chapter 6.15 Speaker Assemblies
The bottom cover assembly must be removed before removing the speaker
assembly. The speaker assembly is installed as a unit with its cable
permanently attached.
To remove the speaker assembly, complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 6.3.
2. Remove the bottom cover assembly as described in Section 6.5.
3. Note the cable routing [2] and disconnect the speaker cable [1] from
the main board (Figure 6-28).