HP Laser MFP 130 User Guide - Page 53
Setup using Windows, Setting up via USB cable
View all HP Laser MFP 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Setup using Windows Setting up via USB cable Items to prepare • Access point • Network-connected computer • You need to download software packages from the HP website to install the printer software. For HP's all-inclusive help for the printer, go to www.hp.com/support/laser130MFP. • A machine installed with a wireless network interface • USB cable 1 Check whether the USB cable is connected to the machine. 2 Turn on your computer, access point, and machine. 3 Download printer driver software from the HP website (www.hp.com/support/laser130MFP). 4 Unzip the driver package and run the driver installer. 5 Review and accept the installation agreements in the installation window. Then, click Next. 6 Select Wireless on the Printer Connection Type screen. Then, click Next. 7 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my printer's wireless network. Then, click Next. If your printer is already connected on the network, select No, my printer is already connected to my network. 8 Select Using a USB cable on the Select the Wireless Setup Method screen. Then, click Next. 9 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next. 10 When the wireless network set up is completed, disconnect the USB cable between the computer and machine. Click Next. 11 Select the components to be installed. 12 Follow the instructions in the installation window. Wireless network setup | 53