HP MD5020n User Guide - Page 30
Installing a CableCARD, Settings, Setup > Channel setup > Cable card
View all HP MD5020n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. Insert the CableCARD module 1 into the opening and firmly press it into place until the front plate is flush with the panel. 5. Tighten the two screws 2. Installing a CableCARD You must obtain the CableCARD from your local cable provider. After installing the card, follow any setup instructions provided with the card. 1. Hold the CableCARD with the front label facing up, and then insert it into the CableCARD slot. 2. Gently push the card into the slot until it stops. When fully inserted, the card sticks out of the slot. 3. Press Settings, go to Setup > Channel setup > Cable card, and press OK. Your cable provider uses the information in the CableCARD screens to activate and configure the CableCARD. To remove the CableCARD, pull the card out of the slot. The CableCARD functions are automatically removed. 30 Setting Up the TV