HP MD5020n User Guide - Page 65
Testing the Operation, If the TV turns on, the TV is operating properly.
View all HP MD5020n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Testing the Operation You can use an internal diagnostic test to verify the proper operation of the TV. 1. Turn off the TV. 2. Press the following sequence of six buttons on the remote control: Settings, 999, OK, power. 3. If the TV turns on, the TV is operating properly. If the red warning lights on the front of the TV turn on or start blinking, see "Warning Light Problems" on page 60. Testing the Operation 65
Testing the Operation
65
Testing the Operation
You can use an internal diagnostic test to verify the proper operation of the TV.
1.
Turn off the TV.
2.
Press the following sequence of six buttons on the remote control:
Settings,
999,
OK,
power.
3.
If the TV turns on, the TV is operating properly.
If the red warning lights on the front of the TV turn on or start blinking, see “Warning Light Problems”
on page 60.