HP MD5020n User Guide - Page 59
two screws
View all HP MD5020n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
6. Insert the new lamp module into the opening, firmly press it into place, and tighten the three screws 1. 7. Insert the tabs on the lamp cover 2 into the openings in the case. Position the cover and tighten the two screws 3. 8. Plug in the power cord and turn on the TV. If the lamp does not turn on after the warm-up period, reinstall the lamp module. Maintaining the TV 59
Maintaining the TV
59
6.
Insert the new lamp module into the opening, firmly press it into place, and tighten the three
screws
1
.
7.
Insert the tabs on the lamp cover
2
into the openings in the case. Position the cover and tighten the
two screws
3
.
8.
Plug in the power cord and turn on the TV. If the lamp does not turn on after the warm-up period,
reinstall the lamp module.