HP MSA 2040 HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module
HP MSA 2040 Manual
 |
View all HP MSA 2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MSA 2040 manual content summary:
- HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 1
HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module Firmware S200B26 Release Notes HP Part Number: 579176-004 Published: June 2013 Edition: First - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 2
© Copyright 2013 Hewlett-Packard Development Company, L.P. - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 3
Product models HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module (MSA 2040) Additional devices supported The following table lists supported controller enclosure models and firmware versions for when an MSA2040 drive enclosure is deployed in an MSA array controller enclosure connect - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 4
using Smart Components-Linux environments" (page 6) • "Installing firmware using the Storage Management Utility (SMU)" (page 7) • "Installing firmware using FTP" (page 8) Installation notes and best practices WARNING! Do not cycle power or restart devices during a firmware update. If the update is - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 5
the firmware update. 3. Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target /user /passwd /s where CPxxxxxxx.exe is the downloaded Smart Component filename ip_address is the management IP address of the array controller username - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 6
and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads. 2. In single-domain environments, stop all I/O to vdisks in the enclosure before starting the firmware update. 3. Open a Linux command - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 7
Installing firmware using the Storage Management Utility (SMU) 1. Obtain the firmware package and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads. 2. If using a Smart Component, extract - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 8
the addresses by entering the show enclosures command. The needed data is displayed in the columns labeled EMP A CH:ID Rev and EMP B CH:ID Rev. 5. Using the SMU, prepare to use FTP: a. Determine the network-port IP addresses of the system controllers. b. Verify that the system FTP service is - HP MSA 2040 | HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module - Page 9
11. Verify that the expected firmware version is installed on each module. • In the SMU, right-click the system in the Configuration View panel, and then select Tools > Update Firmware. • In the CLI, execute the show version or the show enclosures command. Effective date June 2013 Effective date 9
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
HP MSA 2040 3.5-inch Large Form Factor
Drive Enclosure I/O Module Firmware
S200B26 Release Notes
HP Part Number: 579176-004
Published: June 2013
Edition: First