HP Nc6400 Power - Page 13

4 Factory power settings This section explains the factory standby, hibernation, and shutdown procedures. Turning the computer or display on or off Task Turn on the computer. Procedure Press the power button. Result ● The power lights are turned on. Turn off the computer.* NOTE If the power lights blink rapidly, an AC adapter with a higher power rating should be connected. ● 1. Save your work and close all open ● applications. ● 2. Shut down the computer through the operating system by selecting Start > Turn Off Computer > Turn Off*. ● The operating system loads. The power lights are turned off. The operating system shuts down. The computer is turned off. NOTE If you are unable to shut down the computer using the standard shutdown procedure, try the emergency shutdown procedures described in this guide. Turn off the display while the Close the computer. power is on. Closing the computer activates the display switch, which initiates standby. *If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer. ENWW Turning the computer or display on or off 9