HP P4014n HP LaserJet P4010 and P4510 Series Printers Embedded Web Server - Us - Page 36
E-mail Server, Configuring outgoing e-mail, Enable Outgoing E-mail
UPC - 883585429066
View all HP P4014n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
E-mail Server Use the E-mail Server screen to configure e-mail settings for outgoing e-mail. Use the settings on this screen to send and receive e-mail messages, including product alerts. The following illustration, table, and procedures describe how to use this screen. Figure 3-3 E-mail Server screen Table 3-3 E-mail Server Callout Area on the screen 1 HP EWS tabs and menus 2 Outgoing e-mail 3 Return E-mail Address 4 Enable SMTP Authentication Information or capability that the area provides For more information, see Navigating through the HP Embedded Web Server on page 6. Configure outgoing e-mail if you intend to use the Alerts or AutoSend features. For more information, see Using the Alerts screen with a product on page 30. This is the device's e-mail address that appears in device alerts. For more information, see Configuring the return e-mail address on page 27. If your SMTP server requires authentication, type the credentials here. Configuring outgoing e-mail You must configure outgoing e-mail if you intend to use the Alerts or AutoSend features. 1. Find the TCP/IP address or fully-qualified domain name of the simple mail transfer protocol (SMTP) mail server on your network. The EWS uses the SMTP server TCP/IP address to relay e-mail messages to other computers. NOTE: Your organization's network or e-mail administrator typically provides this information 2. Select the Enable Outgoing E-mail check box. 26 Chapter 3 Configuring the product from the Settings screens ENWW