HP Pavilion dv6-3200 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 71
Front USB board, Release the ZIF connector to which the front USB board cable is connected
View all HP Pavilion dv6-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Front USB board NOTE: The front USB board and cable are included in the USB Board Kit, spare part number 603683-001. Before removing the front USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: a. Accessory cover (see Hard drive on page 44) b. Keyboard (see Keyboard on page 53) c. Top cover (see Top cover on page 56) Remove the front USB board: 1. Release the ZIF connector to which the front USB board cable is connected, and then disconnect the front USB board cable (1) from the system board. 2. Detach the front USB board cable from the clips (2) built into the base enclosure. (The front USB board cable is also attached to the base enclosure with double-sided tape.) 3. Remove the front USB board (3). Reverse this procedure to install the front USB board. Component replacement procedures 61