HP Pavilion dv8-1000 HP Pavilion dv8 Entertainment PC - Maintenance and Servic - Page 45
on the mass storage device, Grasp the Mylar tabs
View all HP Pavilion dv8-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removal and replacement procedures Remove the mass storage devices: 1. Loosen the five Phillips PM2.5×6.0 captive screws 1 that secure the mass storage device cover to the computer. 2. Lift the rear edge of the mass storage device cover 2, swing it up and forward, and then remove the cover 3. The mass storage device cover is included in the Plastics Kit, spare part number 580404-001. 3. Disconnect the mass storage device cable 1 from the system board. 4. Grasp the Mylar tabs 2 on the mass storage device, and slide the mass storage device 3 away from the mass storage device connector. 5. Remove the mass storage device 4 from the mass storage device bay. Maintenance and Service Guide 4-11
Removal and replacement procedures
Maintenance and Service Guide
4–11
Remove the mass storage devices:
1. Loosen the five Phillips PM2.5×6.0 captive screws
1
that secure the mass storage device cover to
the computer.
2. Lift the rear edge of the mass storage device cover
2
, swing it up and forward, and then remove the cover
3
.
The mass storage device cover is included in the Plastics Kit, spare part number 580404-001.
3. Disconnect the mass storage device cable
1
from the system board.
4. Grasp the Mylar tabs
2
on the mass storage device, and slide the mass storage device
3
away from the mass
storage device connector.
5. Remove the mass storage device
4
from the mass storage device bay.