HP Pavilion dv8-1000 HP Pavilion dv8 Entertainment PC - Maintenance and Servic - Page 95
secure the fan/heat sink assembly to the system board.
View all HP Pavilion dv8-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Removal and replacement procedures Remove the fan/heat sink assembly: 1. Disconnect the fan cable 1 from the system board. 2. Loosen the four Phillips PM2.0×11.0 captive screws 2 and the two Phillips PM2.5×5.0 captive screws 3 that secure the fan/heat sink assembly to the system board. ✎ Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach it. 3. Remove the fan/heat sink assembly 4. Maintenance and Service Guide 4-61
Removal and replacement procedures
Maintenance and Service Guide
4–61
Remove the fan/heat sink assembly:
1. Disconnect the fan cable
1
from the system board.
2. Loosen the four Phillips PM2.0×11.0 captive screws
2
and the two Phillips PM2.5×5.0 captive screws
3
that
secure the fan/heat sink assembly to the system board.
✎
Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and
system board components, it may be necessary to move the fan/heat sink assembly from side to side to
detach it.
3. Remove the fan/heat sink assembly
4
.