HP Pavilion dv8-1000 HP Pavilion dv8 Entertainment PC - Maintenance and Servic - Page 63
keyboard cable, to which the keyboard cable is attached, and disconnect
View all HP Pavilion dv8-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Removal and replacement procedures 6. Lift the rear edge of the keyboard 1 until it rests at an angle. 7. Release the keyboard 2 by sliding it back to disengage the tabs on the front edge of the keyboard from the top cover, and rest it on the display. 8. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and disconnect the keyboard cable 2 from the system board. 9. Remove the keyboard. Reverse this procedure to install the keyboard. Maintenance and Service Guide 4-29
Removal and replacement procedures
Maintenance and Service Guide
4–29
6. Lift the rear edge of the keyboard
1
until it rests at an angle.
7. Release the keyboard
2
by sliding it back to disengage the tabs on the front edge of the keyboard from the
top cover, and rest it on the display.
8. Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached, and disconnect the
keyboard cable
2
from the system board.
9. Remove the keyboard.
Reverse this procedure to install the keyboard.