HP Pavilion g6-1100 HP Pavilion G6 Notebook PC - Maintenance and Service Guide - Page 69
TouchPad LED board, Release the zero insertion force ZIF connector
View all HP Pavilion g6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
TouchPad LED board NOTE: The security cable lock is included with the base enclosure, spare part number 637187-001. TouchPad LED board 647622-001 Before removing the TouchPad LED board, remove the following components: 1. Battery (see Battery on page 44) 2. Service access cover (see Service access cover on page 45) 3. Hard drive (see Hard drive on page 46) 4. Optical drive (see Optical drive on page 48) 5. Keyboard (see Keyboard on page 53) 6. Top cover (see Top cover on page 56) Remove the TouchPad LED board: 1. Position the computer right-side up. 2. Release the zero insertion force (ZIF) connector (1), and disconnect the LED ZIF cable (2) from the system board. 3. Remove the LED board (3). Reverse this procedure to install the TouchPad LED board. ENWW Component replacement procedures 61