HP Pavilion g6-1100 HP Pavilion G6 Notebook PC - Maintenance and Service Guide - Page 85

assembly and system board components, it might be necessary to move the heat sink assembly

Get HP Pavilion g6-1100 PDF manuals and user guides View all HP Pavilion g6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

4. Remove the heat sink assembly (3) by lifting it straight up. NOTE: Steps 6 through 10 apply only to computer models equipped with AMD processors. 5. Position the system board right-side up, with the front toward you. 6. Disconnect the fan cable from the system board (1). 7. Remove the three Phillips 3.0×2.0 screws (2) that secure the heat sink assembly to the system board. NOTE: Due to the adhesive quality of the thermal material located between the heat sink assembly and system board components, it might be necessary to move the heat sink assembly from side to side to detach the assembly. 8. Follow the sequence embossed on the heat sink to loosen the three Phillips 10.0×2.0 captive screws (3) that secure the heat sink assembly to the system board. ENWW Component replacement procedures 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
4.
Remove the heat sink assembly
(3)
by lifting it straight up.
NOTE:
Steps 6 through 10 apply only to computer models equipped with AMD processors.
5.
Position the system board right-side up, with the front toward you.
6.
Disconnect the fan cable from the system board
(1)
.
7.
Remove the three Phillips 3.0×2.0 screws
(2)
that secure the heat sink assembly to the system
board.
NOTE:
Due to the adhesive quality of the thermal material located between the heat sink
assembly and system board components, it might be necessary to move the heat sink assembly
from side to side to detach the assembly.
8.
Follow the sequence embossed on the heat sink to loosen the three Phillips 10.0×2.0 captive
screws
(3)
that secure the heat sink assembly to the system board.
ENWW
Component replacement procedures
77