HP Pavilion g6-1100 HP Pavilion G6 Notebook PC - Maintenance and Service Guide - Page 86
and processor spare part kits.
View all HP Pavilion g6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
9. Remove the heat sink assembly (4) by lifting straight up. Each time the heat sink assembly is removed, the thermal material must be thoroughly cleaned from the system board at locations (1) and (2), from the heat sink assembly at locations (4) and (5), and from the processor (3). Thermal pads and thermal paste must be installed on all surfaces before the heat sink assembly is reinstalled. NOTE: Thermal pads and thermal paste are included with all heat sink assembly, system board, and processor spare part kits. The following illustration shows the locations for thermal material on systems with Intel processors. Each time the heat sink assembly is removed, the thermal material must be thoroughly cleaned from the system board at locations (1), (2), and (3), from the heat sink assembly at locations (5), (6), and (7), and from the processor (4). Thermal pads and thermal paste must be installed on all surfaces before the heat sink assembly is reinstalled. 78 Chapter 4 Removal and replacement procedures ENWW