HP Pro 3000 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 87
Type 2 Battery Holder, Computer Setup F10 Utility Guide
View all HP Pro 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Type 2 Battery Holder 1. To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. When the battery pops up, lift it out (1). 2. To insert the new battery, slide one edge of the replacement battery under the holder's lip with the positive side up (2). Push the other edge down until the clamp snaps over the other edge of the battery. 3. Replace the computer access panel. 4. Plug in the computer and turn on power to the computer. 5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide. Type 3 Battery Holder 1. Pull back on the clip (1) that holds the battery in place, then remove the battery (2). Battery 77