HP ProBook 4545s HP ProBook 4545s Notebook PC - Maintenance and Service Guide - Page 73
Remove the fingerprint board retainer, that secures the fingerprint board to the top cover.
View all HP ProBook 4545s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4. Remove the battery (see Battery on page 34). 5. Remove the following components: a. Bottom door (see Bottom door on page 35). b. Optical drive (see Optical drive on page 39). c. Keyboard (see Keyboard on page 44). d. Metal heat shield (see Metal heat shield on page 48). e. Top cover (see Top cover on page 55). Remove the fingerprint board: 1. Position the top cover upside-down with the front toward you. 2. Remove the screw (1) that secures the fingerprint board to the top cover. 3. Remove the fingerprint board retainer (2). 4. Lift the cable (3) that is attached to the top cover with adhesive from the top cover and then remove the fingerprint reader (4). Reverse this procedure to install the fingerprint board. Component replacement procedures 65