HP ProLiant BL660c ISS Technology Focus, Voume 10, Number 1 - Page 1

2 ISS Technology Update, Volume 10, Number 1 HP completes first phase of modular data center technology development 1 Using HP power management technologies with VMware ESX 3 Kerberos technology with HP Integrated Lights-Out 3 version 1.2 4 Meet the Expert-George Daniels ...5 Recently published Industry-Standard Server technology papers 6 Contact us...7 HP completes first phase of modular data center technology development The HP Rack and Power Group and the Eaton Corporation are co-developing a fully enclosed IT rack system, or modular data center (MDC). The MDC will provide power and cooling for a 100 KW heat load generated by four, six, or eight IT racks. The project is partially funded by a $7.4 million grant from the U.S. Department of Energy (DOE) as part of the American Recovery and Reinvestment Act of 2009. To read about the project and the DOE grant requirements, go to http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02673567/c02673567.pdf. Development phases The MDC project is progressing through three development phases: The Evaluation phase - We built an initial evaluation unit to test the MDC design specifications and demonstrate proof of concept. The Proto One phase - We will develop and validate the serviceability of a new MDC test unit called Proto One. Proto One features HP-patented racks that roll in and out of the bays so that technicians can service a single rack without affecting the operation or cooling of the remaining racks. The Pilot One phase - Eaton will complete implementation of 360 V DC power to the MDC. We will try to integrate MDC monitoring and control capabilities into HP System Insight Manager.