HP ProLiant DL160 HP ProLiant DL160 Generation 5 Server Installation Sheet
HP ProLiant DL160 - G5 Server Manual
View all HP ProLiant DL160 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProLiant DL160 manual content summary:
- HP ProLiant DL160 | HP ProLiant DL160 Generation 5 Server Installation Sheet - Page 1
HP ProLiant DL160 Generation 5 Server Installation Sheet Identifying Server Components Front Panel HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP ProLiant DL160 | HP ProLiant DL160 Generation 5 Server Installation Sheet - Page 2
listed for this server on the HP website: http://www.hp.com/. 6. If you do not have the latest BIOS, update the BIOS now. Refer to the HP ProLiant DL160 Generation 5 Server Maintenance and Service Guide available on the HP website: http://www.hp.com/. 7. Install a supported operating system of - HP ProLiant DL160 | HP ProLiant DL160 Generation 5 Server Installation Sheet - Page 3
Fastening the non-hot-plug hard drive disk to the carrier 4. Connect the cabling from the HDD backplane to the drive using the cables provided. Installing a Memory Module The following guidelines must be followed when memory modules are being added or replaced: • Use only HP supported FBD DDR2 667 - HP ProLiant DL160 | HP ProLiant DL160 Generation 5 Server Installation Sheet - Page 4
press the holding clips inward to secure the memory module in place. Figure 9 Installing a memory module Figure 11 Installing the heat sink assembly DIMM and insert it again. Installing a Processor The HP ProLiant DL160 G5 server supports dual Intel Xeon processors. To install the processor: 1.
HP ProLiant DL160
Generation 5 Server
Installation Sheet
First edition (September 2007)
Part number 449869-001
Important Safety Information
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
Identifying Server Components
Front Panel Components
Figure 1
Front panel components
Item
Description
1
Thumbscrews for rack mounting
2
Optical disk drive bay
3
Serial number pull tab
4
Two front USB 2.0 ports
5
Unit identification (UID) button
6
System health LED
7
NIC1 LED
8
NIC2 LED
9
Power button
10
HDD LED
11
Optional Hard disk drive (HDD) bays 1, 2, 3, and 4
Rear Panel Components
Figure 2
Rear panel components
Item
Description
1
Power supply cable socket
2
PS/2 mouse port (green)
3
GbE LAN port for NIC2
4
Captive thumbscrew for top cover
5
Serial port (teal)
6
Low profile/Half length expansion slot
7
Full height/Full length expansion slot
8
T10/T15 Wrench
9
Thumbscrew for PCI cage
10
UID LED button
11
VGA port
12
HP LO100i Management LAN Port
13
Two rear USB 2.0 ports
14
GbE LAN port for NIC1/Management
15
PS/2 keyboard port (purple)
Legal notices
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Intel and Xeon are trademarks of Intel Corporation in the U.S. and other countries.