HP ProLiant DL160 HP ProLiant DL160 Generation 5 Server Maintenance and Servic - Page 65
Installing PCIe/PCI-X riser boards, PCI Express x16
View all HP ProLiant DL160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Figure 48 Removing the PCI cage Installing PCIe/PCI-X riser boards The system supports up to two riser boards at a time. Use only HP supported expansion boards that meet the following specifications: • Compliance ○ PCI Express x16 ○ PCI-X(available only when the optional PCI-X riser board is installed) • Form Factor ○ Low-profile ○ Full-Height/Full-Length To remove the PCIe Riser card: 1. Loosen the two screws securing the riser card to the PCI cage. 2. Push the riser card down and away from the PCI cage. Removal and replacement procedures 65
Removal and replacement procedures
65
Figure 48
Removing the PCI cage
Installing PCIe/PCI-X riser boards
The system supports up to two riser boards at a time. Use only HP supported expansion boards that
meet the following specifications:
•
Compliance
○
PCI Express x16
○
PCI-X(available only when the optional PCI-X riser board is installed)
•
Form Factor
○
Low-profile
○
Full-Height/Full-Length
To remove the PCIe Riser card:
1.
Loosen the two screws securing the riser card to the PCI cage.
2.
Push the riser card down and away from the PCI cage.