HP ProLiant SE2170s HP ROM-Based Setup Utility User Guide - Page 16
Embedded NICs, Network Boot, Disabled
View all HP ProLiant SE2170s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Embedded NICs These boot options enable or disable network boot for embedded NICs. These settings provide no functionality if an embedded NIC is not installed. NOTE: • When enabling Network Boot support for an embedded NIC, the NIC will not show up in the Standard Boot Order (IPL) until the next reboot. • For Gen8 servers, this option is for the embedded LOM or FlexibleLOM. • Not every NIC Port is bootable on every FlexibleLOM. Because of this, the RBSU menu may offer a network boot option that does nothing. To determine which ports are bootable, see the NIC user documentation. • The display differs slightly, based on the number of embedded NICs. After reading the note message, press any key to display the following settings: • Network Boot • Disabled 16 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)