HP ProLiant SL270s HP ProLiant s6500 Chassis Maintenance and Service Guide - Page 22

Diagnostic tools Troubleshooting resources The HP ProLiant Gen8 Troubleshooting Guide, Volume I: Troubleshooting provides procedures for resolving common problems and comprehensive courses of action for fault isolation and identification, issue resolution, and software maintenance on ProLiant servers and server blades. The HP ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages provides a list of error messages and information to assist with interpreting and resolving error messages on ProLiant servers and server blades. The documents are on the Documentation CD and on the HP website (http://www.hp.com/go/proliantgen8/docs). ProLiant Power Interface Control Utility HP ProLiant Power Interface Control Utility is a command-line utility performing power display and control power functions for the chassis. You can use the utility and the embedded Power Management Controller to set different power levels or chassis power capping. The utility provides the following: • Chassis fan controls • Chassis power control • Server fans and power through BMC, iLO, and BIOS • Capability to power up servers based on power capacity • Power emergency break support • Capability to set the chassis power level through PPIC utilities with BMC and iLO For more information or to download the ProLiant Power Interface Control Utility, see the HP website (http://www.hp.com/support/ppicu_dr). SL-APM overview HP ProLiant SL Advanced Power Manager is a single point of contact for HP ProLiant Scalable System administration. To install, configure, and access HP ProLiant SL Advanced Power Manager, see the HP ProLiant SL Advanced Power Manager User Guide (http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02018322/c02018322.pdf?jumpi d=reg_R1002_USEN). Diagnostic tools 22