HP ProLiant xw2x220c Administrator's Guide HP Session Allocation Manager (HP S - Page 38
Install the HP SAM Registration Service, Control Panel, Administrative Tools, Services, Save
View all HP ProLiant xw2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Install the HP SAM Registration Service ● Log in to the blade PC using an account with local administrative rights, and then run the bladeservice_xx##.MSI file (## is the software version). Replace xx with ◦ EN = English ◦ JA = Japanese ◦ FR = French ◦ DE = German ◦ KO = Korean ◦ ZH-CN = Simplified Chinese ● For Red Hat Linux, extract the HP SAM Linux Registration Service tar.gz package onto the system by executing this command: tar xzvf . Next, run ./install.sh to install the package. ● If necessary, stop the service by going to Control Panel > Administrative Tools > Services, and look for HP SAM Registration Service. If it is running, stop it. For Linux, enter the following command in the terminal: /etc/init.d/daesvc stop. ● Customize the service .CFG file. Edit the hpevent.cfg-sample file. For details about how to customize this file, see Create the HP SAM Registration Service Configuration File on page 31. ● After you customize the configuration file (required-see Create the HP SAM Registration Service Configuration File on page 31), rename (or Save As) the sample file to hpevent.cfg. ● Start the HP SAM registration service by going to Control Panel > Administrative Tools > Services, and start the service under the name HP SAM Registration Service. For Linux, enter the following command in the terminal: /etc/init.d/daesvc start. ● If the computing resource has a firewall, enable the ports below. ◦ Incoming: - From Web server (UDP/47777) to blade (UDP/47777) - From Web server (TCP/ANY) to blade (TCP/139) - From access devices (TCP/ANY) to blade (TCP/3389)-RDP - From access devices (TCP/ANY) to blade (TCP/42966)-RGS NOTE: The default RGS port is TCP/42966; however, RGS 5.3 and later allows this to be changed. Please see the RGS documentation for details. ◦ Outgoing: - From blade (TCP/ANY) to Web server (TCP/80-HTTP) - From blade (UDP/47777) to Web server (UDP/47777) NOTE: Another way to enable the port is to enable the software service itself. Follow the firewall instructions to enable the HP SAM Registration Service software. 30 Chapter 3 Installation ENWW