HP Q7493A User Manual - Page 209
System Is Full, Bad Optional Tray
View all HP Q7493A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Control panel message alternates with Ready [FS] DEVICE WRITE PROTECTED To clear press alternates with Ready [FS] FILE OPERATION FAILED To clear press alternates with Ready [FS] FILE SYSTEM IS FULL To clear press alternates with Ready [FS] NOT INITIALIZED ABCDEFGHIJ 0110000000 alternates with To exit press Stop Access Denied MENUS LOCKED BAD DUPLEXER CONNECTION alternates with For help press BAD OPTIONAL TRAY CONNECTION ENWW Description The file system device is protected and no new files can be written to it. Recommended action 3. Turn the printer back on. 4. If the message still persists, replace the Flash DIMM. 1. To enable writing to the Flash Memory, turn off write protection, using HP Web Jetadmin. 2. To clear the message, press the key. 3. If the message persists, turn the printer off then on. The printer received a PJL file system 1. command that attempted to perform an illogical operation (for example, to download 2. a file to a non-existent directory). To clear the message, press the key. If the message persists, turn the printer off then on. 3. If the message reappears, there may be a problem with the software application. The printer received a PJL file system 1. command that attempted to store something on the file system but was unsuccessful because the file system is full. 2. Use HP Web Jetadmin software to delete files from the Flash Memory and try again. To clear the message, press the key. 3. If the message persists, turn the printer off then on. The device has not been initialized. You can use Web JetAdmin to initialize the device. This message is displayed when a paper path sensor test or a paper path test is run. The alphabetical value indicates which sensor is being checked. No action necessary. An attempt has been made to modify a menu item while the control panel security mechanism is enabled by the printer administrator. The message will disappear shortly, and the printer will return to Ready state. Contact the printer administrator to change settings. The duplexer is not connected properly and must be reinserted before printing can continue. Turn the printer off. Press to see step by step information. The 500-sheet input tray is not making proper 1. Verify that the printer is on a level connection with the printer. surface. 2. Turn the printer off. Control panel messages 193