HP Q7493A User Manual - Page 212
Control panel message, Description, Recommended action, CAUTION, Event Log Empty
View all HP Q7493A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Control panel message EIO DISK X NOT FUNCTIONAL For help press EIO X disk initializing EIO X disk spinning up Event Log Empty Genuine HP supplies installed INCORRECT [COLOR] CARTRIDGE alternates with For help press The supplies gauge will display the consumption levels of print cartridges. Incorrect PIN INCORRECT SUPPLIES For status press The supplies gauge will display the consumption levels of print cartridges. Initializing permanent storage Initializing... INSERT OR CLOSE TRAY X For help press Description Recommended action The EIO disk in slot X is not working correctly. 1. Turn the printer off. 2. Remove the EIO disk from the slot indicated and replace with a new EIO disk drive. The EIO disk device in slot X is initializing. No action necessary. The EIO disk device in slot X is spinning up No action necessary. its platter. SHOW EVENT LOG was selected from the No action necessary. control panel, and the event log is empty. A new HP cartridge has been installed. The printer returns to the Ready state after approximately 10 seconds. No action necessary. A cartridge is installed in the wrong slot and 1. Open the top and front covers. the cover is closed. CAUTION The image transfer unit can be easily damaged. 2. Open the image transfer unit. 3. Remove the incorrect print cartridge. 4. Install the correct print cartridge. 5. Close image transfer unit and then close the top and front covers. The wrong PIN was entered. After three Re-enter PIN correctly. incorrect PIN entries, the printer will return to Ready. At least one supply item is incorrectly 1. positioned in the printer and another supply item is missing, incorrectly placed, out, or low. 2. Press to access the SUPPLIES STATUS menu. Press and to highlight the specific supply that has a problem. 3. Press to view help for the supply. 4. Press and to step through the instructions. Displayed when the printer is turned on to show that permanent storage is being initialized. No action necessary. This message is displayed when the printer No action necessary. is turned on, as soon as the individual tasks begin initialization. Tray XX must be inserted or closed before the Close the tray indicated. current job can be printed. 196 Chapter 8 Problem solving ENWW