HP SignagePlayer mp8000s Hardware Reference Guide - Page 18
Replacing the Front Bezel,
View all HP SignagePlayer mp8000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
To replace the front bezel: 1. Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1) then rotate the top side of the bezel onto the chassis (2) and snap it into place. Figure 2-5 Replacing the Front Bezel 2. Replace the access panel. 3. If the computer was on a stand, replace the stand. 4. Reconnect the power cord and turn on the computer. 5. Lock any security devices that were disengaged when the access panel was removed. 12 Chapter 2 Hardware Upgrades
To replace the front bezel:
1.
Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1)
then rotate the top side of the bezel onto the chassis (2) and snap it into place.
Figure 2-5
Replacing the Front Bezel
2.
Replace the access panel.
3.
If the computer was on a stand, replace the stand.
4.
Reconnect the power cord and turn on the computer.
5.
Lock any security devices that were disengaged when the access panel was removed.
12
Chapter 2
Hardware Upgrades