HP StorageWorks 2/16 HP StorageWorks SAN Switch 2/16 V3.1.2 (AA-RR84D-TE, May - Page 28
Installing the rear mounting brackets (HP 10000 series or comparable EIA cabinet)
View all HP StorageWorks 2/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the SAN Switch 2/16 Caution: For proper air flow, the SFP media side of the SAN Switch 2/16 must face the rear of the rack. This mounting allows air to enter from the front of the rack and to exhaust at the rear of the rack, similar to other rack-mounted equipment. This prevents switch overheating, which may cause it to fail. To install the switch in a rack: 1. Check the contents of the shipping carton to verify that all of the required parts and hardware are available. 2. Choose a mounting location in the rack. 3. Attach the rear mounting brackets to the rear rack uprights by completing one of the following steps: - For an HP 10000 series or comparable EIA cabinet, assemble each of the two brackets with two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers as shown in Figure 4. Figure 4: Installing the rear mounting brackets (HP 10000 series or comparable EIA cabinet) 28 SAN Switch 2/16 Version 3.1.2 Installation Guide