HP StorageWorks 2/16V HP StorageWorks Fabric OS 5.3.0b Release Notes (AA-RWEYF - Page 20

Modifying port speed and trunking on FC4-48 ports from Web Tools, followed by HAfailover, and then trying to re-launch, Port Admin Fixed per Fabric OS 5.3.0 window on those same ports fails to reload Web Tools window. F_Port route cleanup doesn't happen correctly when NPIV is used on switch in Access Gateway mode. Fixed per Fabric OS 5.3.0 EZSwitch Setup device display is overlapped in Display Connection window when window size not maximized. Fixed per Fabric OS 5.3.0 Portstatsclear help page description of behavior on 2Gb and 4Gb platforms is ambiguous. Fixed per Fabric OS 5.3.0 FR4-18i tracedump files contain many BP error messages and one empty file, potentially leading to incomplete support files. Fixed per Fabric OS 5.3.0 During stress testing when rebooting all core switches in a loop, E-ports may get stuck in "Mod_Val" mode. Fixed per Fabric OS 5.3.0 Error messages are generated when applying iSCSI easycreate operation from Web Tools on unreachable FC Targets. No error messages if LUN information is not retrievable from an FC Target. Errors are only displayed when applying the operation. Fixed per Fabric OS 5.3.0 If Dynamic Load Sharing (DLS) or In-Order Delivery is disabled, it can't be enabled from Web Tools. However, it can be set/reset via CLI. Fixed per Fabric OS 5.3.0 Web Tools event filtering uses a time range of 0-11 rather than 1-12. In Web Tools Fabric Events and Events window, on invoking filter button and filtering based on "from" time or "to" time, on providing a time greater than 12 (e.g. 12:30 PM) will result in an error stating that time should be in range of 0-11. Fixed per Fabric OS 5.3.0 Additional Port Info column in FC Ports tab in Web Tools shows "None (FMS Mode)" instead of "Disabled (FMS Mode)." Fixed per Fabric OS 5.3.0 FR4-18i blades rebooted during firmware commit process per firmwaredownloadstatus output. Process does recover. Fixed per Fabric OS 5.3.0 With EZSwitchSetup, fixed zone can't be configured with all ports designated as storage or hosts. This is correct behavior, but the message displayed doesn't describe how to correct the misconfiguration should the user attempt to configure in that manner. Fixed per Fabric OS 5.3.0 Error messages occur during IPsec FCIP IO. Fixed per Fabric OS 5.3.0 Incorrect information returned during Request Node Identification Data (RNID) registration. Fixed per Fabric OS 5.3.0 User sees wrong port type after port swap on issuing fwsamshow from CLI, due to port type getting swapped in the SAM Report. Fixed per Fabric OS 5.3.0 Due to current handling of invalid zone type during zone enforcement after failover, Name Server daemon (nsd) panic results in CP fault Fixed per Fabric OS 5.3.0 after firmwaredownload. Unable to view policy details in the absence of IPSEC license from "Show IP Security policies". Fixed per Fabric OS 5.3.0 After changing an expired password and selecting another Admin Domain during the same session, the password expiration message and password prompt are displayed again. Currently have to exit session and re-login after changing an expired password to avoid this issue. Fixed per Fabric OS 5.3.0 Error messages from ACL configuration through SMI are too generic and don't contain sufficient information to debug the problem. Fixed per Fabric OS 5.3.0 20