HP StorageWorks 2/32 Brocade Fabric OS Message Reference Guide (53-1000242-01, - Page 184

18 FCR-1054 FCR-1054 Message , [FCR-1054], ,, WARNING, , Port received ILS of incorrect size (); valid ILS size is . Probable Cause Recommended Action Severity Indicates that an internal link service (ILS) IU of invalid size was received from the switch on the other end of the link. Check the error message log on the other switch using the errShow command for additional messages. Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if necessary. Run the portLogDumpPort command on both the receiving and transmitting port. Run the fabStateShow command on transmitting switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. WARNING FCR-1055 Message , [FCR-1055], ,, INFO, , Switch with domain ID does not support backbone to edge imports. Probable Cause Recommended Action Severity Indicates that a switch that does not support backbone to edge routing was detected in the backbone. Edge to edge routing will work, but backbone to edge routing might fail. No action is required if backbone to edge routing is not required. Otherwise replace the switch with one that supports backbone to edge routing. INFO FCR-1056 Message , [FCR-1056], ,, INFO, , Switch with front domain ID does not support backbone to edge imports. Probable Indicates that a switch that does not support backbone to edge routing is running in the MetaSAN. Cause 18-16 Fabric OS Message Reference Publication Number: 53-1000242-01