HP StorageWorks 2/32 Brocade Fabric OS Message Reference Guide (53-1000242-01, - Page 89

AUTH-1033 2 AUTH-1033 Message , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch Probable Cause Recommended Action Severity Indicates that an entity was not configured in the SCC policy and tried to connect to the port. Add the entity's WWN to the SCC policy and reinitialize authentication by using the portDisable and portEnable commands or the switchDisable and switchEnable commands. ERROR AUTH-1034 Message , [AUTH-1034], ,, ERROR, , Failed to validate name in : port Probable Cause Recommended Action Severity Indicates that the specified entity name in the payload is not in the correct format. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AUTH-1035 Message , [AUTH-1035], ,, ERROR, , Invalid length in message: length , port Probable Cause Recommended Action Indicates that a particular data field in the authentication message has an invalid length field. This error usually relates to internal failure. Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. Fabric OS Message Reference Publication Number: 53-1000242-01 2-11