HP StorageWorks 2/32 Brocade Fabric OS Message Reference Guide (53-1000242-01, - Page 419

SEC-1095 58 SEC-1095 Message , [SEC-1095], ,, ERROR, , Deleting FCS policy is not allowed. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1096 Message , [SEC-1096], ,, ERROR, , Failed to delete because Probable Cause Recommended Action Severity Indicates that a policy cannot be removed because deleting it would result in invalid security policy configuration. Verify the security policy configuration requirements and remove any policies that require the policy you want to remove first. ERROR SEC-1097 Message , [SEC-1097], ,, ERROR, , Cannot find policy set. Probable Cause Recommended Action Severity Indicates that the specified policy could not be found. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 58-25