HP StorageWorks 2/32 HP StorageWorks Fabric OS 5.2.1b Release Notes (AA-RWEYC- - Page 18

If failover occurs while FC4-48 blades being slotpoweron, some E-ports and unused ports may get stuck at Mod_Val state. Fixed per Fabric OS 5.2.1. Core file ffc_data is generated after disable/enable switch. Fixed per Fabric OS 5.2.1. swNbEntry under swFabric omits display of trunked EX-port ISLs. Fixed per Fabric OS 5.2.1. After configdownload and reboot, portshow displays FCIP tunnel for an IPIF that does not exist on the GE. Fixed per Fabric OS 5.2.1. In Mixed Fabric AD Context, EnumerateInstances/EnumerateInstanceNames/ExecQuery (Brocade_SwitchFcPort) is returning SwitchFCPort Instances of NON v5.2.0 FOS Switches. Fixed per Fabric OS 5.2.1. Supportsave not marking all local tracedump files as FTPed consistently after supportsave transfer completed. Fixed per Fabric OS 5.2.1. Porterrshow shows Slot and Port for chassis based systems, but should show in slot/port format. Fixed per Fabric OS 5.2.1. QuickLoop is not supported on Fabric OS 5.2, so Web Tools should grey out buttons to create it. Fixed per Fabric OS 5.2.1. MPR 400 faults during power up. Fixed per Fabric OS 5.2.1. Portenable does not enable the "Disabled (Insufficient frame buffers)" port even after portcfglongdistance command is issued to reduce the distance to get within enough buffer. Fixed per Fabric OS 5.2.1. After deleting many user accounts (150) from Web Tools, it loses connection to the switch. Fixed per Fabric OS 5.2.1. ipperf reports higher (double/triple) loss rates when running over impaired WAN link. Fixed per Fabric OS 5.2.1. High availability of transferred supportsave files not ensured with current implementation. Fixed per Fabric OS 5.2.1. VE port goes down and then comes up with two tunnels of 500 MB each and compression turned ON. I/O is resumed when the VE port comes back up. Fixed per Fabric OS 5.2.1. If Linux magic debug sequence "sysrq" is not disabled by default, switch may restart/kill tasks/umount disks. Fixed per Fabric OS 5.2.1. Error message occurs after setting 4/256 speed to 1Gbps. Fixed per Fabric OS 5.2.1. If ports are disabled from the edge fabric, the unused bb xlate domain is preserved to prevent disruption in the bb fabric. However, after HA failover the BB xlate domain is not preserved, potentially causing fabric reconfiguration in the backbone. Fixed per Fabric OS 5.2.1. Using powerslotoff command to turn off a blade, switch view in Web Tools shows the slot is vacant but the temperature status still displays the temperature of the blade. Fixed per Fabric OS 5.2.1. Unexpected messages seen when DHCP is turned ON/OFF, but DHCP still gets enabled/disabled. Fixed per Fabric OS 5.2.1. Hosts lost access to storage due to lack of buffer credits to transmit frames over particular VC. Fixed per Fabric OS 5.2.1. Warning dialogue appears after modifying an AD and neither saving it nor applying it, then switching the AD context from the switch Fixed per Fabric OS 5.2.1. explorer window, then closing the expired AD window. EX Port trunks attached to edge switches running Fabric OS 3.2.0 firmware fail to recover after fastboot of FCR switches. Fixed per Fabric OS 5.2.1. Persistently disabled port will be enabled after switchenable in FICON mode, but should not be. Fixed per Fabric OS 5.2.1. 18